[Durgical](https://durgical.com/en/) › [DurgiPedia](https://durgical.com/en/durgipedia/) › [Dentistry](https://durgical.com/en/dentistry/) › [Restorative dentistry and materials](https://durgical.com/en/dentistry/areas/restorative/) › Denture base resins and acrylics

# Denture base resins and acrylics

- Dental material

Most denture bases are acrylic (PMMA): light, cheap, easy to repair and gum-coloured. They can crack, absorb water and harbour yeast if not kept clean.

Updated Nov 12, 2026

**See it in 3D:** [Maxillae](https://durgical.com/en/anatomy/maxilla/) · [Mandible](https://durgical.com/en/anatomy/mandible/)

## Key points

- PMMA is the standard denture base.
- Heat-cured or milled beats self-cured.
- Store wet; no hot water.

## What it is

Polymethyl methacrylate (PMMA) is the standard denture base polymer. Heat-cured acrylic, processed in a flask, gives the best properties; self-cured (cold-cure) acrylic is used for repairs, relines and provisional work; milled and 3D-printed resins are increasingly used in digital workflows. Flexible thermoplastic bases are an option for some partial dentures. Residual monomer from incomplete curing can irritate the mucosa and cause allergy.

## How to think about it

At microscopic scale an acrylic denture behaves like a plastic sponge: it takes up water, holds yeast in its pores and scratches, and remembers any heat it meets. Good curing, a polished surface and cool, wet storage answer all three.

## Composition and properties

- Heat-cured PMMA: stronger and lower residual monomer than self-cured.
- Milled PMMA from pre-cured blocks has very low porosity and monomer.
- Acrylic absorbs some water, which slightly changes its dimensions; dentures are stored wet.
- Fractures follow fatigue (midline of upper dentures) or impact (dropping).
- Porosity and rough surfaces harbour Candida.

| Feature | Heat-cured PMMA | Self-cured (cold-cure) PMMA | Milled or 3D-printed resin |
| --- | --- | --- | --- |
| Processing | Packed in a flask and heat-cured | Sets at room temperature | Milled from pre-cured blocks or printed |
| Residual monomer | Low | Higher | Milled: very low; printed: depends on post-curing |
| Strength and porosity | Strong, low porosity | Weaker, more porous | Milled: dense; printed: depends on resin and curing |
| Typical use | Complete and partial denture bases | Repairs, relines, provisional work | Digital denture workflows |

## Uses, limits and safety

- Allergy to methacrylate is rare in patients but possible; it presents as burning and redness under the denture.
- Hot water distorts acrylic dentures.
- Polished, glazed surfaces resist plaque better than rough ones.

## Next step / Initial management

- Store dentures in water or a denture cleanser when out of the mouth.
- Cracked or broken denture: refer to the dentist; avoid home glues.
- Burning under a new denture with normal-looking mucosa: refer to check for residual monomer or allergy.

## Common traps

- **Hot water sterilises a denture safely**: hot water distorts acrylic and ruins the fit
- **A denture can be left out to dry overnight**: acrylic changes dimension as it dries, so it is stored in water or a denture cleanser
- **Burning under a new denture is always [candidiasis](https://durgical.com/en/microbiology/candida-albicans/)**: residual monomer irritation or, rarely, methacrylate allergy can cause it with normal-looking mucosa
- **A cracked denture can be fixed with household glue**: it is weak, may be toxic and roughens the base; the dentist repairs it with acrylic

## Test yourself

Think of the answer, then tap the question to see it.

## What is the standard denture base material?

Polymethyl methacrylate (PMMA) acrylic resin.

## Why is heat-cured acrylic preferred to self-cured for denture bases?

It is stronger and has less residual monomer.

## Why should dentures be stored wet?

Acrylic absorbs water; drying out can change its dimensions and fit.

## A 72-year-old's upper denture split down the middle after years of use. What caused it?

A fatigue fracture along the midline from repeated flexing, often with a poor fit; refer to the dentist for repair or a new denture.

## A woman feels burning under a new denture a few days after fitting, and the mucosa looks normal. What should be considered?

Irritation from residual monomer or, rarely, methacrylate allergy, as well as pressure or candidiasis; refer to the dentist.

[Add to my cards (5)](https://durgical.app/estudiar/?add=/en/dentistry/denture-base-resins-and-acrylics/)

## Connections

## See it in 3D 2

The structures of Durgical's 3D anatomy where it is found.

- [Maxillae](https://durgical.com/en/anatomy/maxilla/)
- [Mandible](https://durgical.com/en/anatomy/mandible/)

## Related 5

- [Complete dentures: how they are made and held](https://durgical.com/en/dentistry/complete-dentures-how-they-are-made-and-held/)
- [Relining, rebasing and repairing dentures](https://durgical.com/en/dentistry/relining-rebasing-and-repairing-dentures/)
- [Denture stomatitis and denture sores](https://durgical.com/en/dentistry/denture-stomatitis-and-denture-sores/)
- [Digital dentistry: intraoral scans and CAD/CAM](https://durgical.com/en/dentistry/digital-dentistry-intraoral-scans-and-cad-cam/)
- [Biocompatibility and allergy to dental materials](https://durgical.com/en/dentistry/biocompatibility-and-allergy-to-dental-materials/)

[← All of dentistry](https://durgical.com/en/dentistry/)

Educational content; it does not replace assessment by a dentist or doctor and is not a clinical instruction. For facial or neck swelling with difficulty swallowing or breathing, a knocked-out tooth or bleeding that will not stop, go to an emergency department at once.

Sources: [Polymeric Denture Base Materials: A Review](https://pmc.ncbi.nlm.nih.gov/articles/PMC10422349/) (Polymers (PMC open access), 2023); [Management of Chronic Atrophic Candidiasis (Denture Stomatitis): A Narrative Review](https://pmc.ncbi.nlm.nih.gov/articles/PMC9967389/) (International Journal of Environmental Research and Public Health (PMC open access), 2023); [Clinical Applications and Mechanical Properties of CAD-CAM Materials in Restorative and Prosthetic Dentistry: A Systematic Review](https://pmc.ncbi.nlm.nih.gov/articles/PMC10455074/) (Journal of Functional Biomaterials (PMC open access), 2023).

## **Spotted a mistake?** We are always improving for the community. Tell us what is wrong and our team will review it. Report a mistake

Representative model, for educational purposes only.

---
Source: https://durgical.com/en/dentistry/denture-base-resins-and-acrylics/
License: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Cite as: DurgiPedia (durgical.com), https://durgical.com/en/dentistry/denture-base-resins-and-acrylics/
