Durgical
EN
Open the app

Properties of dental materials: strength, stiffness, hardness and expansion

  • Dental material

Each filling material behaves differently under bite, heat and moisture. Its strength, stiffness, hardness and expansion explain where it works and fails.

Updated

What it is

Mechanical, physical and chemical properties predict how a material performs in the mouth. Strength is the stress needed to break it; stiffness (elastic modulus) is its resistance to bending; toughness is the energy it absorbs before fracture; hardness is resistance to indentation and wear. Thermal expansion, conductivity, solubility, water sorption and wettability matter because the mouth is wet and changes temperature constantly.

Composition and properties

  • Elastic modulus: enamel and ceramics are stiff; dentine and composite are more flexible.
  • Brittle materials (ceramics, amalgam, glass ionomer) fail suddenly in tension; they are designed with adequate thickness.
  • Coefficient of thermal expansion: glass ionomer is close to tooth; composite expands more, stressing the margin.
  • Hardness: ceramics harder than enamel can wear opposing teeth if rough.
  • Wettability and surface energy determine how well adhesives and impression materials flow on the tooth.
PropertyWhat it meansWhy it matters in the mouthExample
StrengthStress needed to break itSurvives biting forcesZirconia high; glass ionomer low
Elastic modulus (stiffness)Resistance to bendingA mismatch with the tooth stresses the bondEnamel and ceramics stiff; dentine and composite flexible
ToughnessEnergy absorbed before breakingBrittle materials crack suddenlyCeramics low; metals high
HardnessResistance to indentation and wearRough material harder than enamel wears the opposing toothUnpolished ceramic
Thermal expansionChange in size with temperatureA mismatch opens marginsGlass ionomer close to tooth; composite expands more
Thermal conductivityHow fast heat passes throughMetals carry cold and heat to the pulpAmalgam and gold conduct; composite insulates

Uses, limits and safety

  • Thin ceramic fractures; thin composite flexes and debonds.
  • Metals conduct heat, so deep metal fillings need pulp protection.
  • Water sorption and solubility slowly degrade some cements and composites.

Next step / Initial management

  • Match the material to the load and site: high-stress posterior areas need strong, tough materials of adequate thickness.
  • Repeated fracture of a restoration type in one patient: refer back to the dentist to review material choice and bite.
  • Thermal sensitivity under deep metal restorations: refer for assessment of pulp protection.

Common traps

  • Strong and tough mean the same thing: strength is the stress to break; toughness is the energy absorbed before breaking, which brittle materials lack
  • A harder material is always better: ceramic harder than enamel wears the opposing teeth if it is left rough
  • The stiffer the filling the better: a stiffness mismatch with the tooth concentrates stress at the bond
  • A thinner ceramic saves tooth and is just as safe: brittle materials need adequate thickness or they fracture

Test yourself

Think of the answer, then tap the question to see it.

What does the elastic modulus describe?

A material's stiffness, its resistance to elastic deformation under load.

Why do ceramic restorations need a minimum thickness?

Ceramics are brittle and fail suddenly under tension, so thin sections fracture.

Which restorative material has thermal expansion closest to tooth structure?

Glass ionomer cement.

A patient's thin ceramic onlay cracked within a year under a heavy bite. Which property explains it?

Ceramics are brittle with low toughness: thin sections under tension fracture suddenly, so adequate thickness or a tougher material is needed.

A patient with a deep metal filling feels sharp pain with ice cream. Why?

Metals conduct heat well and carry cold to the pulp; deep metal fillings need enough dentine or a protective base. Refer to the dentist if the pain lingers.

Add to my cards (5)

Connections

← All of dentistry

Educational content; it does not replace assessment by a dentist or doctor and is not a clinical instruction. For facial or neck swelling with difficulty swallowing or breathing, a knocked-out tooth or bleeding that will not stop, go to an emergency department at once.

Sources: Influence of inorganic nanoparticles on dental materials' mechanical properties: A narrative review (BMC Oral Health (PMC open access), 2023); Mechanical properties of provisional dental materials: A systematic review and meta-analysis (PLoS One (PMC open access), 2018); Posterior composite restoration update: focus on factors influencing form and function (Clinical, Cosmetic and Investigational Dentistry (PMC open access), 2013).

Spotted a mistake?We are always improving for the community. Tell us what is wrong and our team will review it.Report a mistake

Representative model, for educational purposes only.