Durgical
EN
Open the app

Biosafety in the microbiology lab

  • Laboratory diagnosis

Biosafety protects lab staff and the community from the microbes being handled, matched to the risk of each task.

Updated

What it is

Laboratory biosafety is the set of practices, equipment and building design that keeps workers and the public from being infected by the agents a lab handles. Controls are chosen by risk assessment: how infectious and severe the agent is, how it spreads and what the procedure does, especially whether it creates aerosols. Biosafety levels 1 to 4 describe increasingly strict containment.

Key facts

  • Laboratory-acquired infections come mostly from unnoticed aerosols, then sharps injuries, splashes to mucous membranes and ingestion from contaminated hands or surfaces.
  • Classic laboratory-acquired agents: Brucella, Shigella, Salmonella, Neisseria meningitidis, Mycobacterium tuberculosis, Francisella, Coccidioides, and hepatitis B virus.
  • Aerosols arise from centrifuging, vortexing, opening cultures, flaming loops and pipetting; these steps are done inside a class II biological safety cabinet.
  • Never sniff culture plates: it has caused infections, for example with Brucella.
  • Slow-growing tiny gram-negative coccobacilli from blood suggest Brucella or Francisella: further work moves to a safety cabinet, and the isolate may be referred.
  • The WHO Laboratory Biosafety Manual (4th edition) asks for an evidence-based risk assessment before any work, rather than assigning controls by agent alone.

Step by step

  1. Exposure: stop work and make the area safe (contain the spill, warn others).
  2. Decontaminate yourself: wash skin with soap and water, rinse eyes or mucosa at the eyewash.
  3. Report at once to the supervisor and occupational health; record the agent, route and time.
  4. Assess the risk and start post-exposure prophylaxis or vaccination when indicated for that agent.
  5. Follow up with symptom monitoring and, for some agents, serology over the following weeks.

The four biosafety levels

LevelRiskExample agentKey controls
BSL-1Agents not known to cause disease in healthy adultsNon-pathogenic Escherichia coliStandard microbiological practice, open bench, hand-washing sink
BSL-2Moderate-risk agents causing disease of varying severityStaphylococcus aureusRestricted access, gowns and gloves, biological safety cabinet for aerosol-producing work, autoclave, eyewash
BSL-3Serious or lethal disease spread by inhalationMycobacterium tuberculosisControlled access, respirators as needed, all open work in a cabinet, directional airflow, two self-closing doors, medical surveillance
BSL-4Dangerous exotic agents with high aerosol risk and no reliable treatment or vaccineEbola and Marburg virusesSeparate building or zone, class III cabinet or positive-pressure suit, clothing change and shower, dedicated air supply and exhaust

Common traps

  • A laboratory infection always follows a recognisable accident: most come from unnoticed aerosols during routine steps, with no event the worker remembers.
  • Gloves make open-bench work with any culture safe: gloves stop skin contact, not inhalation, so aerosol-producing steps go in a biological safety cabinet.
  • Smelling a culture plate is a harmless help to identification: it inhales organisms directly and has caused laboratory infections, for example with Brucella.
  • The biosafety level is fixed by the agent's name alone: current guidance asks for a risk assessment of the agent and of the procedure before any work.
  • A tiny slow-growing gram-negative coccobacillus from blood can be worked up on the open bench like any other isolate: it suggests Brucella or Francisella, so work moves into a cabinet and the isolate may be referred.

Test yourself

Think of the answer, then tap the question to see it.

Weeks after working up a slow-growing blood isolate on the open bench, a lab worker has fever, sweats and joint pain. What is likely, and how was it acquired?

Brucellosis, a classic laboratory-acquired infection, most likely from aerosols during open handling or from sniffing the plates.

In a tuberculosis lab, which is riskier: reading a sealed culture tube or vortexing an open sputum sample? Why?

Vortexing an open sample, because it produces aerosols that carry M. tuberculosis; such steps are done inside a cabinet under BSL-3 controls.

A worker splashes a bacterial culture into one eye. What should happen first and next?

Rinse at the eyewash, make the area safe, report at once to the supervisor and occupational health, then a risk assessment decides prophylaxis and follow-up.

Why is Ebola virus cultured only at BSL-4 while S. aureus is handled at BSL-2?

Ebola causes lethal disease with aerosol risk and no reliable treatment, so it needs full isolation from the worker; S. aureus is a moderate-risk agent handled with standard barriers.

A mold grows at room temperature from the lung biopsy of a patient from an endemic area. Why is the plate not opened on the bench?

It may be a dimorphic fungus such as Histoplasma or Coccidioides, whose mold form releases spores that infect by inhalation; it is opened only in a cabinet.

Add to my cards (5)

Connections

← General microbiology

Educational content on microorganisms; not a treatment guide and no substitute for a health professional's advice. No doses are given.

Sources: CDC LC Quick Learn: Recognize the four Biosafety Levels (CDC, 2024); Laboratory biosafety manual, 4th edition (World Health Organization, 2020); Guidelines for Safe Work Practices in Human and Animal Medical Diagnostic Laboratories (CDC (MMWR), 2012); Laboratory Acquired Infections (CDC (Safe Labs Portal), 2024).

Spotted a mistake?We are always improving for the community. Tell us what is wrong and our team will review it.Report a mistake

Representative model, for educational purposes only.