Durgical
EN
Open the app

The pelvis, the fetal head and the cardinal movements of labour

  • Topic

A baby's head is slightly too big for a straight path through the pelvis. Birth works because the head turns and bends at each level, like a key in a lock.

Updated

See it in 3D: Sacrum · Coccyx · Pubic symphysis · Sacrospinous ligament · Puborectalis · Perineal body

What it is

Labour depends on three things: the powers (uterine contractions and maternal pushing), the passenger (the fetus: its size, lie, presentation, position and attitude) and the passage (the bony pelvis and soft tissues). The pelvic inlet is widest from side to side, the midpelvis (at the ischial spines) is the narrowest level, and the outlet is widest from front to back. A well-flexed head presents its smallest diameter (suboccipitobregmatic, about 9.5 cm); a deflexed or brow presentation presents larger ones. The head therefore enters the pelvis facing sideways (occiput transverse) and must turn about 90 degrees to leave facing the mother's back (occiput anterior). The sequence of positional changes is called the cardinal movements: engagement, descent, flexion, internal rotation, extension, restitution and external rotation, and expulsion.

Key facts

  • Pelvic types: gynaecoid (round inlet, most favourable), android (heart-shaped, narrow), anthropoid (long oval, favours occiput posterior) and platypelloid (flat).
  • Lie (longitudinal, transverse, oblique), presentation (cephalic, breech, shoulder) and position (the occiput's relation to the maternal pelvis) are separate questions.
  • Station 0 means the presenting bony part is level with the ischial spines; engagement is usually present at or near station 0.
  • Sutures and fontanelles let the skull bones overlap (moulding); the anterior fontanelle is diamond-shaped and the posterior triangular.
  • Pelvic types are a rough guide only: gynaecoid in about half of women, anthropoid in about a fifth, android in under a third and platypelloid in about 3%. The classification comes from early twentieth-century studies, and the pelvis loosens and changes shape in late pregnancy and with her position, so pelvimetry predicts a vaginal birth poorly.
  • Cephalopelvic disproportion is absolute when the fetus and pelvis truly do not fit, and relative when the problem is the presentation or position of the head.

Step by step

  1. Engagement: the widest part of the head (biparietal diameter) passes the inlet, usually in the transverse position.
  2. Descent: contractions and pushing move the head down; station is measured in centimetres above or below the ischial spines.
  3. Flexion: resistance from the pelvic floor tucks the chin onto the chest, presenting the smallest head diameter.
  4. Internal rotation: at the midpelvis the occiput turns forward under the pubic symphysis, fitting the front-to-back slot of the outlet.
  5. Extension: the occiput pivots under the pubic arch and the head is born by lifting the chin (face, then chin over the perineum).
  6. Restitution and external rotation: the head turns back in line with the shoulders, which rotate into the front-to-back diameter.
  7. Expulsion: the anterior shoulder slips under the pubis, then the posterior shoulder and body follow.

Presentation and the diameter the pelvis must pass

Attitude of the headPresenting diameterApproximate sizeUsual outcome
Well flexed (vertex)SuboccipitobregmaticAbout 9.5 cmNormal vaginal birth
Neutral (military)OccipitofrontalAbout 11.5 cmSlower labour; often flexes as it descends
Partly extended (brow)MentoverticalAbout 13.5 cmCannot deliver vaginally unless it flexes or extends: caesarean
Fully extended (face)SubmentobregmaticAbout 9.5 cmVaginal birth possible only if chin is anterior

In clinical practice

  • Vaginal examination finds the position by feeling the sagittal suture and the fontanelles: the small triangular posterior fontanelle marks the occiput.
  • Persistent occiput posterior gives a longer, more painful labour with back pain, more assisted births and more perineal tears.
  • Caput (scalp swelling) and heavy moulding can make the head seem lower than it is; judge descent by the bony skull and abdominal palpation in fifths.
  • Leopold manoeuvres on the abdomen give lie, presentation and engagement before any internal examination.
  • Recognising occiput posterior: back pain in labour, an early urge to push before full dilatation, a flattened lower abdomen with fetal limbs felt in front, and on vaginal examination the diamond-shaped anterior fontanelle near the front of the pelvis; when caput hides the sutures, an intrapartum ultrasound shows the position. Labour is longer because the head is usually deflexed and presents a larger diameter, and it must rotate the long way (about 135 degrees) or be born face to pubis.
  • Options in principle: most occiput posterior heads rotate by themselves; meanwhile give time, good contractions (oxytocin if they are weak), analgesia and position changes (their effect on rotation is uncertain). In the second stage, an experienced operator may rotate the head by hand or with a rotational assisted birth, or deliver it face to pubis; a caesarean is chosen when the head is high or rotation fails.
  • When the passage is the problem: a contracted or flat (platypelloid) pelvis, short stature (in one population a height under 145 cm doubled the risk of disproportion), and rarely soft-tissue obstruction. A previous pelvic ring fracture is not by itself a reason for caesarean: in one large cohort most women who laboured gave birth vaginally, and implants or residual deformity did not predict caesarean.
  • When the passenger is the problem: a large baby (macrosomia, more common in post-term pregnancy), malpresentation and malposition, and fetal conditions that stop the head flexing, such as anencephaly, a neck mass, cord loops around the neck or polyhydramnios.
  • Untreated obstruction follows a chain: a fetus that cannot pass → no descent despite strong contractions → pressure injures the bladder, rectum and vagina and the uterus can rupture → haemorrhage, sepsis and obstetric fistula for the mother (obstructed labour causes most fistulas), and asphyxia, stillbirth or brain injury for the baby. Early recognition and caesarean break the chain (see labour progress).

What it changes in practice

  • In a slow second stage, check position, attitude and station before deciding on pushing, an assisted birth or a caesarean.
  • A brow presentation that persists in active labour, or a transverse lie, needs a caesarean.
  • Suspected cephalopelvic disproportion (no descent despite good contractions, heavy moulding, caput) means stop oxytocin escalation and call the obstetrician.
  • Refer women with known pelvic deformity (fracture, rickets) or malpresentation at term for a birth plan at a level with surgery.

Common traps

  • Confusing presentation with position: 'cephalic' says what comes first; 'occiput anterior' says which way it faces.
  • Calling the head engaged because the caput is at the spines: the swelling can sit lower than the bone.
  • Thinking the inlet is the tightest point: the midpelvis at the ischial spines is the narrowest, which is why arrest often happens there.
  • Assuming a face presentation must be a caesarean: with the chin anterior it can deliver; with the chin posterior it cannot.
  • An early urge to push means the second stage has begun: in occiput posterior the occiput presses on the rectum and causes the urge before full dilatation, so check dilatation before pushing.

Test yourself

Think of the answer, then tap the question to see it.

Why does the fetal head usually enter the pelvis in the transverse position but leave it occiput anterior?

The inlet is widest from side to side and the outlet from front to back, so the oval head must rotate about 90 degrees at the midpelvis to fit each level.

Why is flexion of the head so important in labour?

It brings the smallest head diameter (suboccipitobregmatic) to the front, so the head fits through the pelvis more easily.

A persistent brow presentation is found in active labour. What is the usual outcome and why?

Caesarean section, because the brow presents the largest diameter (mentovertical), which cannot pass through a normal pelvis.

Where is the narrowest level of the pelvis and why does it matter clinically?

The midpelvis at the ischial spines; it is where arrest of descent and failure of rotation usually happen, and it is the reference for station.

In a long labour with back pain, the anterior fontanelle is felt behind the pubic symphysis. What is the position, and why is labour slower?

Occiput posterior: the head is often deflexed, so it presents a larger diameter, and it must rotate about 135 degrees to occiput anterior or be born face to pubis.

Add to my cards (5)

Elsewhere in DurgiPedia

Connections

← All of obstetrics and gynaecology

Educational content; it does not replace assessment by a doctor or your institution's protocols, and it contains no doses. For heavy bleeding, a severe headache or blurred vision, a seizure, fever, strong abdominal pain or fewer baby movements, go to an emergency department at once.

Sources: Normal Labor: Physiology, Evaluation, and Management (StatPearls Publishing (NCBI Bookshelf), 2025); Abnormal Labor in Obstetrics: Recognition and Management (StatPearls Publishing (NCBI Bookshelf), 2025); WHO labour care guide: user's manual (World Health Organization, 2020); Modern Utility of Pelvimetry: a Relevant Tool or an Outdated Concept? (Cureus, 2025); Short stature as an independent risk factor for cephalopelvic disproportion in a country of relatively small-sized mothers (Archives of Gynecology and Obstetrics (Toh-adam R et al.), 2012); Pregnancy Outcomes in Women Following a Pelvic Ring Injury: A Retrospective Cohort Study Involving 120 Births (JB & JS Open Access, 2026); Obstructed labor and its effect on adverse maternal and fetal outcomes in Ethiopia: A systematic review and meta-analysis (PLoS One, 2022); Delivery, Face and Brow Presentation (StatPearls Publishing (NCBI Bookshelf), 2024).

Spotted a mistake?We are always improving for the community. Tell us what is wrong and our team will review it.Report a mistake

Representative model, for educational purposes only.